Specifications Condition: New Color:Black Warranty:10 Year Package Include 1 x Part# Front Right Lower Ball Joint 1 x Part# Front Left Lower Ball Joint Fits the following vehicles
2x Suspension Kit Front Lower Ball Joint For 1975-76 Plymouth Duster Scamp Dodge Specifications Condition: New Color:Black Warranty:10 Year Package Include 1 x Part# Front Right Lower Ball Joint 1 x Part# Front Left Lower Ball Joint Fits the following vehicles 1976 Dodge Dart 1976 Plymouth Duster 1976 Plymouth Scamp 1976 Plymouth Valiant 1975 Dodge Dart 1975 Plymouth Duster 1975 Plymouth Scamp 1975 Plymouth Valiant Note Please be sure you review the compatibility information. If you have a question about the part please free contact us before buying, we will give you a best reply in time. We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution. Replacement Guideline Ball joints Purchase the correct replacement ball joint assembly for your vehicle. Remove the wheel and access the ball joint. Soak all the bolts with WD-40 or PB Blaster. Pull the cotter pin and loosen the large castellated nut. Pop loose the ball joint. Remove the allen bolts and slide the control arm free. Guide the new joint through the knuckle hole. Bolt the joint into place using the hardware included. Torque the bolts to the proper specifications. Screw in the new grease fitting and pump grease into the assembly. Control Arms lift the vehicle using a car lift, ideally a wheel-free four-post car lift loosen and remove the corresponding stabiliser fixing screws. Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller). Remove the old control arm Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner Fit the new control arm with the supplied accessories and attach new fixing screws and nuts. Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm. lower the vehicle until the suspension is compressed Tighten the fixing screws with the torque stipulated by the vehicle manufacturer. Lower the vehicle all the way. Measure the chassis and adjust if necessary. Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm. To conclude, test-drive the vehicle. Sway bars To hold the stud on the end of the sway bar link while adding the new lock nut. Using the wrench, install the new lock nut, making sure to wrench it the whole way. With the sway bar link in position, put the nut on using your hand. Wrench the nut tight to the vehicle manufacturer recommended torque values Changing wrenches as needed to fit the new sway bar link nut. Bad Control arm symptons popping noise steering is unstable uneven tire wear Signs of a ball joint breaks Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle Steering-The steering sloppy or stiff Tires -Uneven tire wear Signs of sway bars breaks Rattling and thumping noises on rough roads. Imprecise vehicle handling. Stronger inclination of the vehicle during cornering. Infiuence of a bad joint break Causing mysterious clunking noise or drifting steering Affecting your steering and suspension seriously Importance of Control Arms It is a link that connects the frame of the car to the wheel hub assembly or steering knuckle. It allows a driver to steer a car while also guiding the wheels up and down with the road surface. They have a vital role in a vehicle's overall stability and drivability. Infiuence of a bad sway bars Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers Item Specifics Placement on Vehicle Front, Left, Right, Lower Brand auspartshouse Manufacturer Part Number 10217298 Number of Kit Pieces 2pcs Manufacturer Warranty 10 Years Fitment Type Direct Replacement Mounting Hardware Included No Interchange Part Number K781,K783 Suspension Grade Standard Custom Bundle Yes Modified Item No Color Black Surface Finish Polished Packaging New in Box Type Control Arm & Ball Joint Assembly Adjustable Yes Greasable Yes Superseded Part Number 2275462,288486,3683972,3683984,383792,383794,4532494 OE/OEM Part Number 2275463,288487,3683973,3683985,383793,383795,4532495 Vintage Car Part No Performance Part Yes Universal Fitment No
Payment: We use Pricetronic's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won. To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order. Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question". Payment Options: Paypal, G Pay, Visa, Mastercard, American Express, and Discover. Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by Pricetronic messages within 12 hours. Payment must be received within 10 days as auction ended or order might be delayed.
Shipping: 1. More than 90% orders processed within 24 hours of payment verification. 2. We only ship to the address in order provided to us. Your PAYPAL address will not be recognized as shipping address. 3. The images shown is the the actual item you will get and the size are for your reference. 4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns: 1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from Pricetronic. OR, you may choose to have a replacement. 3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.
Feedback: We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Contact Us: Any question or problem, please feel free to contact us via Pricetronic message.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Hot Item USD 12.87 USD 15.80 USD 25.99 USD 20.45 USD 34.40
New List Item USD 28.49 USD 53.99 USD 66.99 USD 56.49 USD 105.99
2x Suspension Kit Front Lower Ball Joint For 1975-76 Plymouth Duster Scamp Dodge Specifications Condition: New Color:Black Warranty:10 Year Package Include 1 x Part# Front Right Lower Ball Joint 1 x Part# Front Left Lower Ball Joint Fits the following vehicles 1976 Dodge Dart 1976 Plymouth Duster 1976 Plymouth Scamp 1976 Plymouth Valiant 1975 Dodge Dart 1975 Plymouth Duster 1975 Plymouth Scamp 1975 Plymouth Valiant Note Please be sure you review the compatibility information. If you have a question about the part please free contact us before buying, we will give you a best reply in time. We are galde to offer quality service and vehicle parts to you, any after sale questions please message us before open case or feedback, we will give you the best solution. Replacement Guideline Ball joints Purchase the correct replacement ball joint assembly for your vehicle. Remove the wheel and access the ball joint. Soak all the bolts with WD-40 or PB Blaster. Pull the cotter pin and loosen the large castellated nut. Pop loose the ball joint. Remove the allen bolts and slide the control arm free. Guide the new joint through the knuckle hole. Bolt the joint into place using the hardware included. Torque the bolts to the proper specifications. Screw in the new grease fitting and pump grease into the assembly. Control Arms lift the vehicle using a car lift, ideally a wheel-free four-post car lift loosen and remove the corresponding stabiliser fixing screws. Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller). Remove the old control arm Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner Fit the new control arm with the supplied accessories and attach new fixing screws and nuts. Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm. lower the vehicle until the suspension is compressed Tighten the fixing screws with the torque stipulated by the vehicle manufacturer. Lower the vehicle all the way. Measure the chassis and adjust if necessary. Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm. To conclude, test-drive the vehicle. Sway bars To hold the stud on the end of the sway bar link while adding the new lock nut. Using the wrench, install the new lock nut, making sure to wrench it the whole way. With the sway bar link in position, put the nut on using your hand. Wrench the nut tight to the vehicle manufacturer recommended torque values Changing wrenches as needed to fit the new sway bar link nut. Bad Control arm symptons popping noise steering is unstable uneven tire wear Signs of a ball joint breaks Sound -A faint, intermittent clunking noise that seems to be coming from a corner of your vehicle Steering-The steering sloppy or stiff Tires -Uneven tire wear Signs of sway bars breaks Rattling and thumping noises on rough roads. Imprecise vehicle handling. Stronger inclination of the vehicle during cornering. Infiuence of a bad joint break Causing mysterious clunking noise or drifting steering Affecting your steering and suspension seriously Importance of Control Arms It is a link that connects the frame of the car to the wheel hub assembly or steering knuckle. It allows a driver to steer a car while also guiding the wheels up and down with the road surface. They have a vital role in a vehicle's overall stability and drivability. Infiuence of a bad sway bars Without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers Item Specifics: Placement on Vehicle : Front, Left, Right, Lower Brand : auspartshouse Manufacturer Part Number : 10217298 Number of Kit Pieces : 2pcs Manufacturer Warranty : 10 Years Fitment Type : Direct Replacement Mounting Hardware Included : No Interchange Part Number : K781,K783 Suspension Grade : Standard Custom Bundle : Yes Modified Item : No Color : Black Surface Finish : Polished Packaging : New in Box Type : Control Arm & Ball Joint Assembly Adjustable : Yes Greasable : Yes Superseded Part Number : 2275462,288486,3683972,3683984,383792,383794,4532494 OE/OEM Part Number : 2275463,288487,3683973,3683985,383793,383795,4532495 Vintage Car Part : No Performance Part : Yes Universal Fitment : No
Payment: We use Pricetronic's Safe and Secure Checkout. Just click the Pay Now button at the top of any of the auctions you have won. To pay for multiple auctions, successfully win all auctions you wish to purchase and then click the Pay Now button on any of the listings you won. You will only have to checkout and pay once for your entire order. Please review our detailed policies on shipping and fixing any issues before purchasing the item. If you have any questions, please email us through "Ask a question". Payment Options: Paypal, G Pay, Visa, Mastercard, American Express, and Discover. Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by Pricetronic messages within 12 hours. Payment must be received within 10 days as auction ended or order might be delayed.
Shipping: 1. More than 90% orders processed within 24 hours of payment verification. 2. We only ship to the address in order provided to us. Your PAYPAL address will not be recognized as shipping address. 3. The images shown is the the actual item you will get and the size are for your reference. 4. If you have not received your shipment within 15 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns: 1. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 2. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from Pricetronic. OR, you may choose to have a replacement. 3. Return shipping is to be paid by the Buyer if the problem turned to be buyer's end, or return will be seller's responsibility.
Feedback: We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Contact Us: Any question or problem, please feel free to contact us via Pricetronic message. All rights reserved.
Returns Accepted for this item if it's within 30 Days